Thanks guys,
Ethanol works for me as I have a gallon of denatured alcohol in the shop and a empty bottle of LT.
Here are my calculations if anyone could glance over them and check my assumptions and calculations I am using drops because thats the measurement I am going to use to decant the NPA:
Bottle of LT: 7.4mL
Drops to fill a bottle : 320 drops (using denatured alcohol and not to the brim, but a air bubble below the threaded structure)
Sprays in a full bottle : 110 sprays
320 drops in 7.4mL = .0231mL per drop
1ml = 43 drops
110 sprays of 320 drops = 2.9 drops per spray
110 sprays of 7.4mL drops = .0672ml per spray
_________
NPA - 2.4mg total mones per 5mL
NPA - .48mg total mones per mL
NPA - .24mg = 240 mcg
-none per mL
Assuming .0231mL per drop = 5.54mcg of -none per drop
________
Mix - 1:5 (one part NPA : five parts alcohol)
At 2.9 drops per spray, each spray will have .0112mL of NPA and .056mL alcohol or .483 drops NPA and 2.416 drops of alcohol
.483 drops of NPA multiplied by 5.54mcg -none per drop = 2.675mcg of -none per spray
________
Next I make the 2.675mcg of -none per spray relatable to me...
One drop AE = 3.33mcg of -none. (reference from terry0400-40 :
http://pherolibrary.com/forum/showthread.php?t=20421)
For me three drops of AE get things smoking so that's 9.99mcg of -none which equals ~4 sprays of 1:5 NPA (or ~2 drops of NPA direct)... is that right?
I when I look around the web I see others base their calculation of .05mL per drop but when counting the drops to fill a known size bottle I found it took twice the amount.
Bookmarks