SOE & NPA/TE/PI USERS

[MOBLEYC57]

Was

wondering about a couples of things using SOE + one of NPA, TE, or PI without mixing them ...

(1) Are you

applying NPA/TE/PI and covering it with SOE, or

(2) Are you applying NPA/TE/PI and then applying SOE over

another area, or

(3) Are you applying SOE and then applying NPA/TE/PI on top of it?

(4) Have you tried both

ways, and what are your thoughts as to which worked better?

Thanks for sharing!

[watcher27944]

I put the soe over whatever

eles I`m wearing,because I like the way it smells, so I use it for a cover

[ToBeOrNotToBe]

Was

wondering about a couples of things using SOE + one of NPA, TE, or PI without mixing them ...

(1) Are you

applying NPA/TE/PI and covering it with SOE, or

(2) Are you applying NPA/TE/PI and then applying SOE over

another area, or

(3) Are you applying SOE and then applying NPA/TE/PI on top of it?

(4) Have you tried both

ways, and what are your thoughts as to which worked better?

Thanks for sharing!

Option 2!

I never roll up the SoE bottle over an area where I previously applied a different product (to avoid contamination).

I usually apply SoE in my wrists and TE/NPA in my neck. I cover TE/NPA with a cologne (like Rochas Man).

[Skye]

I would think

that the second option applies to me.

What I usually do is the "Pit trick" with SOE. Enough Roll on SOE on

each armpit and at most 2-4 inches (each) on the wrists / or forearm.

I don't use so much PI (the Ylang Y

scent smells odd to me and I save my PI for WKM mixes)

what I do use is NPA/m and TE. I put like 1-2 (max)

drops of NPA split on my chest/shoulders and usually put another 1 drop of TE (Heat or arouser) on my ears / near

sideburns.

I don't recall putting SOE directly above anything as I'm paranoid about cross contamination

(with the roller head) ... but I do sometimes put SOE first then put a drop of NPA or TE over the same area...i

can't really see any difference (or any difference seen due to either application method would be "confounded"

statiscal data..thus inconclusive)

Cheers.

Was wondering about a couples of things

using SOE + one of NPA, TE, or PI without mixing them ...

(1) Are you applying NPA/TE/PI and covering it

with SOE, or

(2) Are you applying NPA/TE/PI and then applying SOE over another area, or

(3) Are you

applying SOE and then applying NPA/TE/PI on top of it?

(4) Have you tried both ways, and what are your

thoughts as to which worked better?

Thanks for sharing!