PmixCalc is Update!

[abductor]

Hi Folks,

The PMixCalc is update! Now you can choose Drop, Dab or Spray
Calculations base is:
1 drop = 0.05ml
1 Dab = 0.01ml
1 Spray = 0.13ml

Ok I have a doubt about AE.. someone in forum asked
why AE have same ratio for none, nol and rone ..
(I cat values from LS-Product Table)

I recived
a new AE/m bottle and label say:
0.020%none, 0.015%nol and 0.010%rone.

Again, I will be very been thankful if anyone can send me
a mone value of 1 drop AE/m and AE/w

Thanks you guys,

ps- Now I can think about some new look designer to PmixCalc. /ubbthreads/images/graemlins/crazy.gif /ubbthreads/images/graemlins/smile.gif
ps2- Hey CK where are you man ? I waiting your spreadsheet /ubbthreads/images/graemlins/blush.gif
ps3- The adress is the same..
http://www.webdevxs.com/pms/pherosimulator/index.php (\"http://www.webdevxs.com/pms/pherosimulator/index.php\")

[Genome335]

Nice work, maybe you can start adding mixes next like JB#1, WMK#1 in the list of phero products, it\'ll make it easier for people that are dabbing instead of dropping or rolling instead of dabbing ect... to apply a correct dosage of a certain mix /ubbthreads/images/graemlins/smirk.gif.

[ToBeOrNotToBe]

Nice work. /ubbthreads/images/graemlins/grin.gif

[abductor]

</font><blockquote><font class=\"small\">Quote:</font><hr />
Nice work, maybe you can start adding mixes next like JB#1, WMK#1 in the list of phero products, it\'ll make it easier for people that are dabbing instead of dropping or rolling instead of dabbing ect... to apply a correct dosage of a certain mix /ubbthreads/images/graemlins/smirk.gif.

<hr /></blockquote><font class=\"post\">

I like the idea /ubbthreads/images/graemlins/cool.gif /ubbthreads/images/graemlins/cool.gif and it is very easy to do! /ubbthreads/images/graemlins/laugh.gif
Just post Pre-mix mone value in 1 drop .. and I can Update in 1 or 2 minutes ..what you guys think about?

[ToBeOrNotToBe]

</font><blockquote><font class=\"small\">Quote:</font><hr />
</font><blockquote><font class=\"small\">Quote:</font><hr />
Nice work, maybe you can start adding mixes next like JB#1, WMK#1 in the list of phero products, it\'ll make it easier for people that are dabbing instead of dropping or rolling instead of dabbing ect... to apply a correct dosage of a certain mix /ubbthreads/images/graemlins/smirk.gif.

<hr /></blockquote><font class=\"post\">

I like the idea /ubbthreads/images/graemlins/cool.gif /ubbthreads/images/graemlins/cool.gif and it is very easy to do! /ubbthreads/images/graemlins/laugh.gif
Just post Pre-mix mone value in 1 drop .. and I can Update in 1 or 2 minutes ..what you guys think about?

<hr /></blockquote><font class=\"post\">

Acho uma excelente ideia! /ubbthreads/images/graemlins/smirk.gif

[abductor]

</font><blockquote><font class=\"small\">Quote:</font><hr />

Acho uma excelente ideia! /ubbthreads/images/graemlins/smirk.gif
(I find an excellent idea !)


<hr /></blockquote><font class=\"post\">
Eu também,
(Me too!)
PS-
Translations ´cause english is forum language /ubbthreads/images/graemlins/wink.gif

[Genome335]

WKM#1
----
6 SOE, 3 NPA, 1 PI/m (amount of drops) = Total 10 drops/ 1/2 ml.


Total Phero Amount mg/drop: 0.172

.097 Anone, .015 Rone, .06 Nol.
------------------------------------

Pheromones per Drop: .0172mg; .0097 Anone, .0015 Rone, .006 nol
Pheromones per Dab: .00344mg; .00194 Anone, .0003 Rone, .0012 nol
Pheromones per Spray: .02236mg; .002522 Anone, .00039 Rone, .00156 Nol

I think thats right /ubbthreads/images/graemlins/grin.gif.

[Genome335]

Hmmmm....... reading these calculations says that 10 dabs should give me a good dosage of .034mg of mone\'s, it seems like alot. Do you think that a dab is really .01ml?

[Tremann]

Anyone into a windows version of this? I\'d be glad to write in in visual basic all in need is some formulas.

[MOBLEYC57]

</font><blockquote><font class=\"small\">Quote:</font><hr />
Nice work, maybe you can start adding mixes next like JB#1, WMK#1 in the list of phero products, it\'ll make it easier for people that are dabbing instead of dropping or rolling instead of dabbing ect... to apply a correct dosage of a certain mix /ubbthreads/images/graemlins/smirk.gif.

<hr /></blockquote><font class=\"post\">

I second that! /ubbthreads/images/graemlins/cool.gif

[Genome335]

</font><blockquote><font class=\"small\">Quote:</font><hr />
Anyone into a windows version of this? I\'d be glad to write in in visual basic all in need is some formulas.

<hr /></blockquote><font class=\"post\"> You can find almost all the information here ( http://www.love-scent.com/reference/product-table.html (\"http://www.love-scent.com/reference/product-table.html\") ) if you need any more, just ask /ubbthreads/images/graemlins/grin.gif.

[abductor]

</font><blockquote><font class=\"small\">Quote:</font><hr />
Anyone into a windows version of this? I\'d be glad to write in in visual basic all in need is some formulas.

<hr /></blockquote><font class=\"post\">
Hi Tremann,
The first version was write in VB .. but someones thinked that download, dll problems, install, are very suck .. then I write in PHP.. Well I have the sources (PHP and VB) but you will have ask to Bruce because I transferred All Rights to Love-Scent Inc.

[abductor]

</font><blockquote><font class=\"small\">Quote:</font><hr />
WKM#1
----
6 SOE, 3 NPA, 1 PI/m (amount of drops) = Total 10 drops/ 1/2 ml.


Total Phero Amount mg/drop: 0.172

.097 Anone, .015 Rone, .06 Nol.
------------------------------------

Pheromones per Drop: .0172mg; .0097 Anone, .0015 Rone, .006 nol
Pheromones per Dab: .00344mg; .00194 Anone, .0003 Rone, .0012 nol
Pheromones per Spray: .02236mg; .002522 Anone, .00039 Rone, .00156 Nol

I think thats right /ubbthreads/images/graemlins/grin.gif.

<hr /></blockquote><font class=\"post\">

Thanks Genome335 /ubbthreads/images/graemlins/cool.gif I think i can work with WKM#1 today ..when i move to my home.

[Charisma]

Abductor, can you add the other products as well? E.g. Attraction and AFA are not in it /ubbthreads/images/graemlins/frown.gif

[Watcher]

Include Perfect 10 and perhaps DD#1 and DD#Lite. ANd my new one DD#1R which is 70% NPA and 30% SOE

[abductor]

Hi all,
I added the mix WKM#1 .. /ubbthreads/images/graemlins/wink.gif
Please guys if you want see your favourite mix send me values in one drop
like this:
</font><blockquote><font class=\"small\">Quote:</font><hr />

WKM#1
----
6 SOE, 3 NPA, 1 PI/m (amount of drops) = Total 10 drops/ 1/2 ml.
Total Phero Amount mg/drop: 0.172
.097 Anone, .015 Rone, .06 Nol.
------------------------------------
Pheromones per Drop: .0172mg; .0097 Anone, .0015 Rone, .006 nol


<hr /></blockquote><font class=\"post\">
PS-- I added the mix WKM#1 with 0.006 nol, is it ok?

[Charisma]

BUMP! /ubbthreads/images/graemlins/wink.gif

</font><blockquote><font class=\"small\">Quote:</font><hr />
Abductor, can you add the other products as well? E.g. Attraction and AFA are not in it /ubbthreads/images/graemlins/frown.gif

<hr /></blockquote><font class=\"post\">

</font><blockquote><font class=\"small\">Quote:</font><hr />
Include Perfect 10 and perhaps DD#1 and DD#Lite. ANd my new one DD#1R which is 70% NPA and 30% SOE

<hr /></blockquote><font class=\"post\">

[abductor]

Charisma,
I will talk with Oscar about mone concetration in AFA, P10 and New AE ..as i say it is very easy add new product, the problem to me is to know mone concentrations /ubbthreads/images/graemlins/blush.gif /ubbthreads/images/graemlins/confused.gif /ubbthreads/images/graemlins/tongue.gif /ubbthreads/images/graemlins/wink.gif /ubbthreads/images/graemlins/grin.gif...

[oscar]

abductor,

AFA : .2mg/mL Androstenone and .2mg/mL Androstenol
...or : .02% Androstenone -- and .02% Androstenol

P10(m) : .6mg/mL Androstenone, .3mg/mL Androstenol, .1mg/mL Androsterone
.......or : .06% Androsterone, --- .03% Androstenol, -- .01% Androsterone

P10(w) : .5mg/mL A-nol, .3mg/mL A-none, .1mg/mL A-rone, .1mg/mL Copulins
.......or : .05% A-nol, -- .03% A-none, --- .01% A-rone, -- .01% Copulins

AE(m) : .2mg/mL Androstenone, .15mg/mL Androstenol, .1mg/mL Androsterone
.....or : .02% Androstenone, --- .015% Androstenol, -- .01% Androsterone

AE(w) : .2mg/mL Androstenol, .15mg/mL Androsterone, .1mg/mL Androstenone
.....or : .02% Androstenol, --- .015% Androsterone, -- .01% Androstenone

Oscar /ubbthreads/images/graemlins/smile.gif

[Charisma]

Monkey see, monkey do /ubbthreads/images/graemlins/grin.gif

Attraction : .04mg/mL Androstenone and .07mg/mL Androstenol
........or : .004% Androstenone -- and .007% Androstenol

[abductor]

/ubbthreads/images/graemlins/wink.gif
Hey you guys,
It´s done .. I added AFA, P10m, P10w, AEm, AEw and Attraction ...
/ubbthreads/images/graemlins/wink.gif /ubbthreads/images/graemlins/tongue.gif

[Charisma]

Nice work Abductor!
Thanks.

[oscar]

abductor,

You need to delete the \"AE(m)old\" from the calculator. AE never had equal proportions of the three pheros, but a misinterpretation of the products table led some people to believe so.
The old AE(m) had the exact same phero contents as the new, only the fragrance has changed.

Oscar /ubbthreads/images/graemlins/smile.gif

[abductor]

Hi oscar,
Its done.

[abductor]

Hi folks,
MixCalc have new adress. Check out:
mixcalc.sysframe.net
the old url will go shutdown in 1 or 2 days.
Thanks.

[ToBeOrNotToBe]

Is the part related to the WKM mix corrected? Does 1 drop of AE have more -none, -nol and -rone than 1 drop of WKM? That\'s strange...

The optimal \"dose\" of AE is something like 2-4 drops, but the optimal ammount of WKM seems to be 3-4 dabs. But since AE has more -none, -nol and -rone than WKM (based on this program), how can that make sense?

Can someone please check that out?

Thank you.

[hotrocks5]

For this calculator, what would be the norm for a drop and a dab? Because I think a drop of AE from the AE dropper would be different in size compared to a free-falling drop from a bottle of APC. A dab from a a bottle of NPA would be different from a dab from TE. So what constitutes a drop or a dab in relation to this calculator?

[CptKipling]

When mixing you are meant to be using a standard dropper for all the products.

A standard dab is with dropper tops removed.

Common sense people!

[hotrocks5]

I have a question about the calculations made on SOE and PI. As most people who have these products know, SOE (roll-on) and PI each come in a 10 mL bottle and each product is said to contain 5 mg of pheromones. However, on the calculator, why is it that two drops of PI will give you a total of 0.05 mg of mones, whereas two drops of SOE will only give you a total of 0.025 mg of mones? I know each product contains totally different kinds of mones, but if both bottles are the same size and both claim to have the same pheromone content, shouldn\'t 2 drops of SOE and PI have the same amount of mones?

[abductor]

Sorry all,
SoE was with the wrong value ... Now the value is correct!

Thanks Hotrocks5,

/ubbthreads/images/graemlins/wink.gif

[hotrocks5]

Umm...Abductor, I think you reversed the aRone and aNol values for SOE, and I think there should be an extra 0 after the decimal.

[abductor]

Thats true !!!!!
Where is my mind????/ubbthreads/images/graemlins/ooo.gif /ubbthreads/images/graemlins/crazy.gif well, its fixed! thanks again HR5