PI/w soluability

[BassMan]

FWIW, I have been playing with PI/w in sprayable form.

PI/w is soluable in isopropyl alcohol. I used anhydrous, since it was the first bottle I found, but it should work with 93% rubbing alcohol.

PI/w is _not_ soluable in 75.5% EtOH (Everclear). At least, not in mine.

I dumped the two mixes together, resulting in 50% isoprop, 37% EtOH, 13% water, and the PI/w remained in solution.

BTW, I was making a 5% solution of PI/w.

[Cloud9]

Is there a chemist in the Forum?

[**DONOTDELETE**]

Why were you making a five percent solution of PI/w, darlingest?

[BassMan]

</font><blockquote><font class=\"small\">Quote:</font><hr />
Why were you making a five percent solution of PI/w, darlingest?

<hr /></blockquote><font class=\"post\">

I\'m mainly working with integrating WAGG into my life...

* One spray of WAGG (diluted so that one spray delivers 1/2 drop) to my shirt, right over the heart.
* One spray of Andro 4.2 to the crotch of my pants.
* One spray of 25% TE over the Andro 4.2.
* Four dabs 2 A1: 3 NPA : 5 EtOH to (as DrSmellThis puts it) the \"smelly areas\" (crotch and pits, on the skin).

I wanted to play with adding some nol to the mess. PI/w was cheap on the returned products page, I bought a couple. It\'s _way_ too strong for me. 5% gives me just about .010 mg nol per spray, which seems like a good level to play with.

* One or two sprays of 5% PI/w to the back of my head.

(All the sprays are from used Andro 4.2 / Attraction bottles - about .2 ml per spray).

(Dabs are almost exactly 0.01 ml - yup, I put a ml in the bottle and counted them until it was empty. Can you say, anal? Virgo, actually...)

The above mess seems to make males and females alike love being around me. I\'m still testing/tuning.

[**DONOTDELETE**]

Ah.

[Watcher]

Well it is a very good idea bassman, and it might prove useful for other newbies, spray form spreads it out.

[CptKipling]

So that should work for those thinking about diluting PIm aswell.

[BassMan]

</font><blockquote><font class=\"small\">Quote:</font><hr />
So that should work for those thinking about diluting PIm aswell.

<hr /></blockquote><font class=\"post\">

Maybe.

I\'ve received two different PI/m\'s over time. One appears to be in mineral oil base and will only dissolve in oil. The other appears to be a di-glycol type thingie that definately dissolves in alcohol.

Since I don\'t think I tried to dissolve the mineral oil one in isoprop, I will leave it at maybe. I\'ll try it.