PDA

View Full Version : 1 NPA = 4 TE?



xephaoma
03-03-2003, 01:42 AM
Is one drop of 1 NPA = 4 drops of TE? I take this to be true because in the product table it says NPA has 0.48 none/ml, and TE has 0.12 none/mil. Let\'s say if I want to make JB #2 mix with TE, instead of NPA, then the ratio is 7:12 of SPMO&TE. Am I right? Thanks all.

abductor
03-03-2003, 03:56 AM
IN reply======================
Is one drop of 1 NPA = 4 drops of TE?
============================
Definitively YES. You can check this in our phero mix simulator.

check out:
http://www.webdevxs.com/pms/pherosimulator/pms.php (\"http://www.webdevxs.com/pms/pherosimulator/pms.php\")

Phantom
03-03-2003, 04:21 AM
how many drops in a spray?

Goanna
03-03-2003, 05:08 AM
both TE and NPA have only None in them? I though they contained multiple pheromones?

Phantom
03-03-2003, 05:11 AM
They have None and some secret ingredients.

CptKipling
03-03-2003, 06:21 AM
You have to be carefull with this, as every sprayer you will find will have a different output volume. As a rough guide:

\"Volumes:

Dab. This is where one wets the fingertip by holding it over the bottle mouth and tipping the bottle. This was hardest to measure, it comes down to being about 0.01 ml, and no more than 0.02 ml. Measured with a bottle of AE.

Drop. A full-size, free-falling drop from the fingertip measures 0.05 ml. Note that this leaves a partial dab on the fingertip after the drop falls. Measured with a bottle of APC.

Spray. OK, I\'m sure this varies widely, but I measured the spray from my bottle of The Edge into the plastic cap. It\'s 0.13 ml.\"

Thanks to scientist