PDA

View Full Version : Perception



Necromancer
01-05-2005, 08:48 PM
When i

spray perception, I notice that its kind of soapy. Spraying let's say pheromax is all clear, or any other spray for

that matter, but when I spray perception it has like this white soapy material that comes out in the spray and on my

skin. Is that part of the formula; the time-release thing? Im just wondering if thats normal for this water-based

solution, i know the others are mostly alcohol.

:think:

CptKipling
01-06-2005, 09:31 AM
I noticed the same thing, but

it's just the nature of the time release formula.

platinumfox
09-26-2005, 03:04 AM
Yeah me too

jollysnowdevil
09-26-2005, 09:45 AM
yeah it's pretty much

the water polymer thingy. i've even at one point have gotten a bottle where it had flakes floating in the mones. i

was told this wasn't an uncommon experience either. that bottle of mones worked quite fine.

how much

perception do you use?

canivaro
09-26-2005, 01:17 PM
now that the perception is down

to like 1/10th of the content in the bottle, some sort of lint on the inside of the bottle can be seen clearly.

kinda disturbing

jollysnowdevil
09-26-2005, 01:23 PM
now that

the perception is down to like 1/10th of the content in the bottle, some sort of lint on the inside of the bottle

can be seen clearly. kinda disturbing


i wouldn't worry about that.i've seen that

before not often but ive seen it. i've also gotten full bottles that had something that looked like "flakes"

floating in it. in either case there is nothing wrong with it. the mones still work the same way

Rbt
09-28-2005, 02:54 PM
I finally decided to give Perception

another try. After all I got $50 into it and I'm too cheap to waste it... Prior "testing" was poor, but I attribute

a good part of it to the downright crappy atomizers. The "mix" doesn't sound bad, although a little low on -none

(which actually may be good, as I'm personally not too sure about the necessity for a lot of -none), and I love the

idea of a 8-12 hour duration.

I transferred the main 'mones from the original atomizer into the nice atomizer I

got with the L-S Beginners Kit. Tried it today. Whatta difference! Will be testing in depth soon.

jollysnowdevil
09-28-2005, 03:29 PM
I

transferred the main 'mones from the original atomizer into the nice atomizer I got with the L-S Beginners Kit.

Tried it today. Whatta difference! Will be testing in depth soon.

let us know how it goes. i like

the idea of a slightly lower -none concentration as you can always add more to the mix. im beggining to play with

adding npa to the perception. testing grounds have been too unsteady lately so no major results yet, plus i keep

going back to my old mixes for reliability.

Rbt
09-29-2005, 11:54 AM
Addendum:

There has been some

discussion here in another thread about the time extending poly matrix carrier in Perception. There was a question

as to whether it was used in BOTH both the 'mones AND the cover scent.

I haven't gotten a reply back from my

email to BDC Concepts (sent days ago), but I did notice that the description in the Product Guide pages stated that

the matrix was indeed in BOTH, so you should be able to get extended release of your cologne if you use the 'mones,

or conversly get extended release of a different pheromone product if you then use the Perception cover scent.



If I recall you use the Perception product on top of the other product like a "sealcoating."

jollysnowdevil
09-29-2005, 01:05 PM
Addendum:



There has been some discussion here in another thread about the time extending poly matrix carrier in Perception.

There was a question as to whether it was used in BOTH both the 'mones AND the cover scent.

I haven't gotten

a reply back from my email to BDC Concepts (sent days ago), but I did notice that the description in the Product

Guide pages stated that the matrix was indeed in BOTH, so you should be able to get extended release of your cologne

if you use the 'mones, or conversly get extended release of a different pheromone product if you then use the

Perception cover scent.

If I recall you use the Perception product on top of the other product like a

"sealcoating."

yeah i saw that in my packaging as well. never got to posting the findings.



perception always goes on last as any of the alcohol or oil base products will destroy the mones and screw up the

polymer

nadero
09-29-2005, 03:03 PM
perception always goes on last as any of the alcohol or oil base products will destroy the mones and screw up the

polymer

I had understood that alcohol doesn´t destroy the mones...

belgareth
09-29-2005, 06:17 PM
I had understood

that alcohol doesn´t destroy the mones...

Since many mones are disolved in alcohol I doubt they do. Some

of the other pheromone sites do state that pheromones are destroyed by alcohol but that seems a little far-fetched

since so many top quality products are alcohol based.

Gegogi
09-29-2005, 07:03 PM
Water based or not, Perception

doesn't do much for me. MAybe water reduces potency? However, that alcohol infested NPA helps makes the ladies itch

'n twitch something fierce. So, although alcohol may reduce pheromone potency, it certainly is far from destroying

it.

Incidentally, the water based formula of Perception seems to foster the growth of strange flora and fauna

in the bottle...

jollysnowdevil
09-29-2005, 07:05 PM
I had

understood that alcohol doesn´t destroy the mones...

thanks bel. sorry nadero, what i meant to say

is that alcohol & the oil bases are supposed to take away from the special water based polymer that perception

uses.